Emergency Exit Light Inspection Remote Control

This is a remote control specifically designed for inspecting emergency exit signs, tailored for fire safety equipment inspections.
Due to the limitations in the number of buttons that can be memorized, the functions have been narrowed down to the absolute essentials.
The label is a bonus as it tends to peel off easily.
Also, since each label is applied by hand, the appearance may differ from the photos.
The function buttons are set up as follows:

[Button Layout Explanation]
(From the top button downwards, labels are applied below each button.)
Toshiba: Toshiba-made emergency exit sign manual inspection
Pana Exit Sign On: Panasonic-made emergency exit sign inspection
Pana Exit Sign Off: Panasonic-made emergency exit sign interruption
Mitsubishi Exit Sign On: Mitsubishi-made emergency exit sign inspection
Mitsubishi Exit Sign Off: Mitsubishi-made emergency exit sign interruption
Mitsubishi Exit Sign: Mitsubishi-made emergency exit sign manual inspection

[Button Function Explanation]
Inspection button
Starts self-inspection and automatically returns to normal status after inspection is complete.
Interruption button
Interrupts self-inspection and returns to normal status.
Manual Inspection button
Switches to emergency lighting for 3 seconds (Mitsubishi) or 5 seconds (Toshiba), then automatically returns to normal status.

This listing is for the main unit only. Batteries are not included.
Please prepare two AAA batteries.

*We have verified that equivalent infrared signals are output by analyzing the infrared signals of each manufacturer's remote control using our custom-made infrared signal analysis and acquisition device, and comparing the acquired infrared signals with a computer.
Furthermore, we have repeatedly confirmed operation with actual devices.
(Operation confirmed with our home testing equipment. Not used in the field.)

We ask for your purchase if you understand these points.